hexatraction_1176_detail
HexaTraction_RSPro_shortboard_lateralhexatraction_1176_detail

Rail Saver Pro, HexaTraction

$64.99

hexatraction_1176_detail

SKU: RSPHEX Categories: , Tags: ,

Product Description

 

Board Grip & Traction


Temperature independent front foot grip and traction
Light, thin, and doesn’t absorb water
No melting, no hassle, no residues, no contamination
Super easy installation with modular design
Clear, translucent to your board graphics
UV protection and waterproofing for your board deck
Automotive, RSPro®, quality
Non aggressive to your skin

 

Shortboard – Funboard – Longbord – SUP nose – SUP deck

Custom Sizing
A single HexaTraction kit (box) includes eighteen 6 inch hexagons, four half-hexagons and a HexaTraction star shaped template to make installation easy. The HexaTraction kit has a net weight of 4 oz.
Hexatraction kits allow you to cover any sized surf, kite, or SUP board. Each kit covers approximately 3.75 Square Feet. Follow this cheat sheet to properly outfit your board:
HexaTraction Sizing

Installation:

  1. Don’t install it on a cold environment. We recommend to install it at room temperature. Below 20ºC (68F) the material and glue tend to get rigid, so it would make the installation more difficult.
  2. Throughly clean the area with alcohol or similar. Make sure no rest of wax is present. Avoid industrial cleaners.
  3. Before starting, layout the HexaTraction hexagons choosing the best pattern to cover the area where you need grip and traction.
  4. PRO TIP: Peel exactly half of the adhesive backing of the first HexaTraction hexagon, so it will be super easy to align with the board center line.
  5. Pour plenty of water. Plenty! It will help on having no air bubbles.
  6. Stick half of the hexagon making sure to remove all air and water out by rubbing with your fingers and/or cloth. Remove the other half of the backing and squeeze all the air and water out.
  7. PRO TIP: Squeeze from the center to the edges or from one side to the opposite so all air and water gets out.
  8. Using the HexaTraction black star as a template, progress through the deck one hexagon at a time.
  9. PRO TIP: Align by the side of the hexagon with the adhesive backing on.
  10. Complete the layout using the half hexagons if needed.
  11. You’re done. Review all hexagons, making sure all the water is out, let it dry (not on the sun) and let it cure for some hours before heading to the water.

 

HexaTraction uses a strong adhesive. If you need to remove it, we advice to use a hair dryer or heatgun to apply some gentle heat so the adhesive softens, and removal is easier. Specially if your board is painted or coated.

hexapackaging_869_detail

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.